Orelube Lubricating Oils & Greases for Industrial Applications and Boelube Lubricants

ORELUBE SYNTHETIC LUBRICANTS

Orelube Chain Lubricants
  • Synthetic fluids for high temperature chain lubrication
  • Superior high temperature oxidation and thermal stability for prolonged fluid life
  • High film strength and lubricity reduces chain wear and power consumption
  • Products such as HT-1001 / HT-500 / FB-300/250
Orelube H Series Compressor Fluids
  • 100% Synthetic PAO fluid blends designed for Rotary Screw and Rotary Vane type Air Compressors and Reciprocating type Air Compressors
  • Oil drain intervals up to 8000 hours
  • Superior wear protection
  • High oxidation stability
Orelube L Series Compressor Fluids
  • 100% Synthetic Ester fluids designed for Rotary Screw and Vane type and Reciprocating type Air Compressors
  • Oil drain intervals up to 8000 hours with minimal varnish, sludge and carbon deposits
Orelube OL Gear Oils
  • 100% Synthetic PAO blends for superior industrial gear EP lubrication over a wide temperature range
  • Benefits include substantial reductions in friction and power consumption and lower operating temperatures
Orelube ELCG
  • 100% Synthetic electrical conductive grease compound containing a high concentration of electrically conductive solids dispersed in a special synthetic base fluid
Orelube HT-550 SC
  • 100% Synthetic Ester high temperature EP grease for use at operating temperatures above 400 F (204 C)
  • Fortified with PTFE solid lubricant
  • Unique synthetic Sodium complex thickener
  • Thermal and oxidation stability at high temperatures enables long relubrication intervals
  • High load carrying properties
Orelube HT 600
  • 100% Synthetic Ester high temperature EP grease for use at operating temperatures above 400 F (204 C)
  • Fortified with PTFE solid lubricant
  • Nonmelt thickener
  • Thermal and oxidation stability at high temperatures enables long relubrication intervals
  • Superior wear protection
Orelube HT 600 M
  • 100% Synthetic Ester high temperature EP grease for use at operating temperatures above 400 F (204 C)
  • Fortified with Molybdenum disulfide and PTFE solid lubricants
  • Nonmelt thickener
  • Thermal and oxidation stability at high temperatures enables long relubrication intervals
  • Superior wear protection
Orelube Trident 88
  • 100% Synthetic PAO Aluminum complex EP grease
  • Superior low temperature lubrication
  • Synthetic Organo-Molybdenum compound provides good wear protection and oxidation inhibition at high temperatures
  • Superior water resistance
  • High dropping point
  • Shear stability
Orelube HT-707
  • 100% Synthetic Ester nonmelt organoclay grease for use at operating temperatures above 400 F (204 C)
  • Will not drip or run out at continuous elevated temperatures or speeds
  • Thermal and oxidation stability at high operating temperatures enables long relubrication intervals
  • Superior wear protection
Orelube 707 PFPE
  • PTFE thickened, high viscosity Perfluoropolyether grease developed for severe service applications where good film strength is needed at high temperatures, and/or fuel or chemical resistance is required
  • Ultra-long life, continuous operating temperature range -20 to 250 C (-4 to 500 F)