Boelube 70104 / 70106 are two of a series of proprietary lubricants developed through Boeing manufacturing operations and lubricant experience.

Boelube liquid, in combination with air, keeps tools cool and removes chips.
Spray or one shot applications leave a minimal amount of Boelube Liquid that can be left on the work piece for subsequent machining or as a corrosion inhibitor.

Boelube does not contain Silicone, Sulfur, Halogens (such as Chlorine), Phosphorus, Paraffin Wax, Petroleum or Heavy Metals.

Boelube is recommended for use with machining Aluminum, Titanium, Inconel, Stainless Steel, Carbon Fiber Composites (CFRP), Honeycomb, Kevlar, Ferrous and Non-Ferrous Metals. Boelube provides superior lubricity when machining materials such as Aluminum and Titanium resulting in high quality finish and increased tool life.

Boelube applications include Broaching - Cold Working - Deburring - Drilling - Drop Hammer - Forming - Grinding - Gun Drilling - Milling - Oil Hole Tools - Punching - Reaming - Routing – Sawing - Tapping - Thread Cutting.

 

Just insert the Non-Rotating Bit into the opening at the top of the lubricator and withdraw. The rolled carpet in the Hand Held Lubricator has acted as a chip wipe and lubricated the drill, tap or reamer.

The HHL 70104 is designed to accommodate tools up to 1/4 inch in diameter. It is not unusual to drill a substantial number of holes before having to re-lubricate the drill.
Being only 3 inches tall and 1 1/4 inches in diameter, the HHL easily fits in a pocket or tool box.